Clogged drains are the common problems faced by homeowners with aged plumbing systems. They are the only link we have to sewers so it’s only natural that they get blocked every so often. However, clogs can lead to more problems and over time, you may have to contend with waste water backing up. If you have multiple drains backed up in your house, then chances are very high that you will need a professional drain cleaning company to properly resolve the issue. However, if you have a single drain that is blocked, then read on to know how you can tackle the problem yourself.
Have you noticed drops of water on the floor of your toilet when you’re there? Is your floor slippery around the base of your toilet? If you have noticed this then do not worry, your toilet probably may have a leak, but we are going to look at how to repair the leak in your toilet. Before calling your local plumber, let’s see if this is something you can fix yourself.
The small leaks that may be found in your toilet will surely develop slowly into a bigger problem if not corrected. Leaking at the base will usually occur because the toilet is cracked on the wax seal which the toilet sits on is old or was notset right. The cost of repairing this may also go higher especially when repairing a finished floor. Continue reading “How to Repair a Leaking Toilet”
There’s not much in the way of trying out your plumbing configuration in new home construction till you move into the house and begin to use the water system regularly. When the plumbing is first installed into a new home, it goes through a pressure test to guarantee there aren’t any leaks in the system. This is the sole test that may be done till the house owner moves in and contacts the power corporation to have the water turned on.
Many times, although the water lines are pressurized with air, it isn’t feasible to find all of the leaks – if they exist. When the water is at first turned on, it can wash any loosely sealed areas of the piping away.Due to this, it’s not rare for little leaks to be noted in the plumbing after new home construction.
In most cases, leaks can happen around threaded joints, but can also happen in fixed joints. After the water is turned on for the 1st time, a plumber can tighten the joints with the standard plumbing wrench to guarantee they’re tight and not dribbling. They could have to use new plumbing sealer to be sure that no further leaks are achievable.